iGarden K70 Robotic Pool Cleaner Gets $550 Prime Big Deal Days Discount
iGarden K70 pool cleaner is $550 off at $749.99 for Amazon Prime Big Deal Days as fall debris builds up.
The K70 is designed to clean the pool floor, walls and waterline without manual scrubbing. Android Authority reports that it uses three brushless motors and a turbine-style impeller to move up to 22,000 liters of water per hour, or about 5,800 gallons. A Turbo 200% Mode increases suction for heavy debris, while Standard mode is intended for regular cleaning with less battery use.
Two rubber brushes scrub grime as the robot moves, and anti-slip tracks help it climb walls, slopes and steps. At the waterline, the K70 reaches about 2 inches above the surface to clean the oily ring, according to the report. Its 4-liter debris basket uses dual-layer filtration: a 180-micron standard filter for leaves, twigs and pebbles, and an optional 50-micron ultra-fine filter for sand, pollen, fine dust and algae particles. After a cycle, the basket can be emptied, rinsed and reinserted.
The robot offers four cleaning modes: floor only, wall and waterline only, wall and waterline first then floor, and full coverage. It uses 3D S-Path navigation to move in organized passes and AI-Inverter technology to adjust power based on cleaning needs. The K70 is fully cordless. On a full charge, floor-only mode runs up to 7 hours, while full coverage with walls and waterline lasts up to 3.75 hours.
Instead of one long session, users can schedule the K70 to clean every 24, 48 or 72 hours while it remains in the pool. Android Authority says that a one-hour floor cleaning every three days can let the battery last up to 12 days on one charge. Users can also choose cycle lengths of 1, 1.5 or 2 hours, or let it run until the battery is depleted. Shorter, more frequent cleanings are described as better for fall because leaves keep falling.
The K70 has a touchscreen for selecting modes and starting cleaning without a phone. It can also connect to the iGarden Robotics app via Wi-Fi or Bluetooth for poolside configuration, though the report notes there is no underwater signal, so app control only works on land. The robot works in in-ground and above-ground pools of various shapes, including rectangle, circle, kidney and freeform. It supports concrete, fiberglass, mosaic tile, stainless steel and vinyl liner surfaces. It can handle pools up to about 20 by 39 feet and depths from 3.3 to 8.2 feet.
The K70 operates in water temperatures from 39.2°F to 95°F, which Android Authority says is useful as water gets colder later in the season. It is positioned for pools under trees that drop leaves for weeks, for owners who want a clean pool before closing in November, for families in warmer states who swim into fall, and for those returning after weekends away.
The iGarden Pool Cleaner K70 is available on Amazon for $749.99, reduced from $1,299.99, for a $550 savings, or 42% off, during Amazon’s October Prime Big Deal Days on October 6 and 7. It is also available directly from iGarden.